Neutron Detection Explained

Why neutrons matter

Most radiological field work is gamma work. Gamma rays are abundant, they carry isotope-specific energy signatures, and a good identifier reads them well. But gamma rays are also easy to stop. A determined adversary can wrap a source in lead or tungsten and drop its gamma signal to near nothing. That is exactly the scenario that keeps interdiction teams awake, because the most consequential threats, plutonium and other special nuclear material (SNM), are also strong neutron emitters.

Neutrons behave very differently from gammas. They carry no charge, so dense high-Z shielding that blocks gamma rays barely slows them. A neutron channel therefore sees through the shielding that defeats a gamma-only instrument. For counter-smuggling, border security, and SNM safeguards, neutron detection is the practical way to catch a shielded source. The rest of this note explains how that detection is done and which Berkeley Nucleonics platforms offer it.

The detection problem

Neutrons cannot be detected directly the way a gamma deposits energy in a crystal. They have to be captured by a nucleus that then emits something charged and detectable, an alpha particle, a triton, or a fission fragment. Fast neutrons from a source are also far easier to capture once slowed down, so most detectors surround the active material with a hydrogen-rich moderator that thermalizes the neutrons first. The detection methods below differ mainly in which capture nucleus they use and how they read out the resulting charged particle.

Helium-3 proportional tubes

The long-standing benchmark is the helium-3 proportional tube. A thermal neutron captured by a He-3 nucleus produces a proton and a triton that ionize the gas, giving a clean, easily counted pulse. He-3 tubes are highly efficient, have excellent intrinsic gamma rejection, and are well understood, which is why they remain a standard option. The catch is supply: helium-3 is a scarce byproduct of tritium decay, and the global shortage has driven up cost and lead time. That constraint is the main reason the field has invested in alternatives.

Lithium-based scintillators: LiF/ZnS and CLYC/CLLBC

Lithium-6 is another strong neutron capture nucleus, releasing an alpha and a triton. A common implementation layers LiF with ZnS(Ag) phosphor, where the captured-neutron reaction produces a light flash read by a photosensor. It is rugged, contains no scarce gas, and serves well in portable and personal instruments. The PM1703GNA-II MBT uses a LiF/ZnS neutron layer alongside its gamma detector.

The elpasolite crystals CLYC and CLLBC take the idea further. A single crystal detects both neutrons (via lithium capture) and gamma rays, separating the two by the shape of the light pulse, a technique called pulse-shape discrimination. That delivers gamma spectroscopy and neutron sensitivity from one compact detector, with no separate tube. Berkeley Nucleonics offers CLYC and CLLBC as detector options on the SAM 940+.

Solid-state neutron detection

A newer approach uses a solid-state semiconductor device with a neutron-converting layer, capturing neutrons and reading the resulting charged particle electronically. The appeal is a small, robust, low-power package free of pressurized gas, which suits a fatigue-reducing handheld. The SAM 940+ integrates a solid-state neutron detector that Berkeley Nucleonics documentation specifies at a 4 square centimeter active area, 30 percent thermal neutron efficiency, and a gamma rejection ratio of 1 in 10 million (verify against the current datasheet for the exact configuration).

Gamma rejection: the figure that makes a neutron count trustworthy

A neutron channel is only useful if it does not also fire on the intense gamma flux that often accompanies a source. Gamma rejection, sometimes stated as a gamma-to-neutron misidentification ratio, measures how well the detector ignores gammas while counting neutrons. A figure such as 1 in 10 million means the detector registers a false neutron count only once for every ten million gammas it sees. High gamma rejection is what keeps a neutron alarm meaningful in a real field environment, where gamma rates can be high and an unshielded source would otherwise swamp a poorly discriminated channel.

Comparing the methods

Each method trades efficiency, gamma rejection, supply security, and package size differently. The table gives the practical picture; confirm any model-specific performance figure against the current datasheet (verify).

Which BNC models offer neutron detection

Neutron capability spans the line, from a solid-state channel in a handheld to gamma-plus-neutron coverage on backpack and vehicle systems.

Specifying neutron the right way

If your mission includes interdicting shielded SNM, treat neutron detection as a requirement, not an option, and weigh the supply question. He-3 still sets the performance benchmark, but lithium-based scintillators and solid-state detectors give supply-secure paths that fit smaller, lighter instruments. A dual-mode CLYC or CLLBC crystal can deliver both gamma spectroscopy and a neutron count from one detector when package size is tight.

To match a neutron configuration to your operational picture, talk to a Berkeley Nucleonics specialist at info@berkeleynucleonics.com or 800-234-7858. See also the companion notes NaI vs LaBr3 vs CeBr3 Detectors and How to Choose an Isotope Identifier, and browse the full line in the documentation index.